How To Put Together A Bicycle

Bike Associates Guide

Follow these step-past-step instruction to assemble your bike after it has been shipped.

1. Prepare For Bike Assembly

After shipping your bike with BikeFlights, y'all will need to reassemble it - It's piece of cake!

Gather your tools. You will need the post-obit to build your bicycle:

Pocketknife or Abrupt Edge
Allen Wrenches
Torx Wrenches
Pair of scissors or Clippers
Center Lock Tool

ii. Open your bike box, bike bag, or bicycle case.

If you are aircraft with our BikeFlights Box, information technology should be sealed with packing record.

Use a knife to carefully cut along the taped edge.

3. Remove your lid

Lay your bicycle bike box apartment on the floor, remove the pinnacle, and fix bated.

4. Detach Your Bike

Remove your wheel bags and remove your frame from the straps or bungees securing it in your bicycle box.

Leave your wheel in your wheel box to brainstorm associates. Your bike box will provide a barrier between the floor and your bike.

5. Disconnect All Secured Parts

Clip all zip ties and disconnect your secured accessory pocketbook, your seat post, and your handlebars from your bicycle.

6. Remove All Padding From Your Bicycle

Clip all zip ties and remove all padding from your frame, fork, handlebars, crank arms, and derailleur.

seven. Install Your Seatpost

Insert your seat post into your seat tube.

Align and conform to your previously marked saddle acme. Tighten your seat clench to your frame's torque spec.

8. Secure Your Bike In A Bike Stand

Using a bike stand will brand for quicker and easier assembly, but If y'all don't have a bike stand, skip this pace, and continue using your bicycle box as a bulwark between the floor and your bike.

9. Mountain Your Derailleur

Mountain your derailleur to your derailleur hanger, connecting the first few threads.

9. Align And Tighten Your Derailleur

With your derailleur loosely connected to your hanger, rotate your derailleur until the B-Screw and B-Screw Tab sit higher than your derailleur hanger.

Slowly tighten your derailleur mounting commodities to your hanger, catching the B-Screw tab on the edge of derailleur hanger.

eleven. Install Your Handle Bar

Middle your handlebars and rotate them to your marked placement.

Tighten to your stem's torque spec.

12. Install Your Accessories

Install your bottle cages, fenders, lights, GPS, and other accessories.

Tightening to their proper torque specs.

xiii. Install Your Disc Brake Rotors

Install your disc brake rotors onto your hubs, and ensure that they are facing their proper direction.

Tighten your disc brake rotors to your hub'south torque spec.

14. Install Your Wheels

Install your wheels into your bike frame, and secure with your thru axles or your skewers.

15. Install Your Pedals

Install your pedals in your creepo arms.

Your right pedal is threaded regularly (clockwise to tighten), while your left pedal is contrary threaded (counter-clockwise to tighten.)

16. Check Your Gears

Spin your crank artillery with your rear wheel elevated, and cycle through your gears to ensure smooth shifting.

Adjust if necessary.

17. Check Your Brakes

Spin your wheels to make sure your brakes are not rubbing.

Squeeze your brake levers to ensure they are properly engaging.

Adjust if necessary.

18. Check Your Assembled Bike

Double-check that all bolts are tightened properly and that your cycle is safe to ride.

19. Examination Ride Your Completed Bike

With your helmet on, perform a short safe bike ride to test your bike.

Bring your multitool to make tweaks and adjustments if necessary.

xx. Gather Your Packing Materials

Consolidate all of your packing cream, packing straps, bungees, cypher ties, record, accessory bags, and other items used for packing.

Go along all of these items in your bike box, bike bag, or bike case so that they are easy to observe and fix to employ for your next bike shipment.

21. Ride!

Later on your bike is safely congenital and tested, get out there and enjoy the ride!

Source: https://www.bikeflights.com/assembly-guide