How To Increase Exposure In Premiere Pro
Basics of Video Color Correction in Premiere Pro
Color correction is an essential part of the video post-production workflow. It's used in 99% of productions and projects to ensure a professional, consistent, and accurate final video.
In this tutorial, I'll teach you the basics of video color correction by using the various settings in the Lumetri Color panel window inside Premiere Pro CC.
Color correction, or color grading, is the process of fixing or 'correcting' the colors and brightness in footage so that they appear natural, and consistent across a scene in a final video edit. This can mean adjusting the brightness of a clip, changing the overall color temperature, or adjusting several color parameters between clips for a better match.
Premiere makes it very easy to color correct footage — so let's get started!
If you're looking for footage to practice with, Storyblocks has plenty of ungraded clips to work with.
In my example, the footage was captured with an incorrect color temperature — it appears bluer than it naturally should be. Second, to this, the footage is slightly underexposed:
Throughout this tutorial, we will address these issues until we successfully correct the color footage.
1. With the footage imported into Premiere Pro and a sequence created, open theLumetri Colorpanel window by going toWindow at the top of the Premiere screen, then click onLumetri Color.
2. Open theBasic Correction tab inside theLumetri Color panel window to reveal all of the main color correction options.
3. To color correct this clip, we will start off with the overall color. Since we've established the footage we are working with has a bluer tone than it naturally should, we will correct it by using theTemperature slider under theWhite Balance section within theLumetri Color Basic Correction tab.
Adjust theTemperature slider to a warmer tone (orange side) until the areas in your footage that are supposed to be white change to pure white. This will balance the white in your footage, so the overall color temperature or white balance looks natural.
4. Now that the white balance (color temperature) is correct, playback the footage and scan over the lighter and darker areas to see if changes should be made. In our example, the image is a little dark overall, so we can adjust theExposuresetting to increase the overall brightness.
5. Now that the exposure has been improved, the highlights in the footage have blown out a bit. To compensate, let's take theHighlights slider down.
6. By using theShadows setting, we can increase or decrease the darker areas of the footage without affecting the lighter areas. In my example, I will increase the darker areas by adjusting theShadows slider to around 21.
It is generally recommended to not push any slider parameters above 30 or 40. The higher you go, the more video noise/grain you will introduce into the footage. If your videos are only for the web, or YouTube for example, and do not need to follow any broadcast standards, feel free to increase the sliders however much you prefer.
That being said, pumping the settings too high will go against the whole point of color correction, which is to correct the footage, not to make it unnatural. With video editing, less is often more.
7. Now that we've adjusted the footage using some of the main settings let's use theContrast slider to further make some adjustments. Adjusting the contrast low will wash out the footage making the darker areas much lighter. Increasing the Contrast slider to a high setting will darken the overall image, making it appear more dramatic looking, as seen in the two examples below.
Low Contrast:
High Contrast:
Many video editors prefer to slightly increase the contrast of their footage. However, since this footage was already a little underexposed, and the theme of the footage is outdoor adventure, I think it's best to lower the contrast slightly. Keep in mind this is a creative choice, though.
8. Next, to help maintain the detail in the sky, I will decrease theWhites slider to -16.
9. With theBlacks slider, I will decrease it to around -5 so that the darkest parts of the footage do not have as rich of a black level. This is to address the underexposed clip, similar to the steps performed earlier in the tutorial.
10. At this stage, I will review the footage and determine if I can make any final adjustments before moving on to the saturation. After reviewing, I would like to increase theExposure setting to 0.4 as well as decrease theHighlights setting to -27.2.
11. Adjusting theSaturation is common in color correcting footage. Depending on the footage you're working with (and the final result you'd like to achieve) saturation can drastically change the look of your footage as shown in the two examples below:
Saturation set to 0 will remove all of the color and provide you with a black and white look:
Saturation set high will enrich all of the colors, making them very vibrant:
When it comes to increasing saturation, it's best to not push it too high — similar to the general rule for the other settings I mentioned earlier. It may look great as a still frame, but as video playing, high saturation will introduce a lot of video noise.
For the footage I'm working with, I will set the saturation to 122.
12. At this stage, we've completed working in theBasic Correctiontab insideLumetri Color. Now let's click on theCurves tab and openRGB Curves.
TheRGB Curvessetting can isolate colors like the example below by clicking on the red circle and adjusting the curves line graph to increase the amount of red in the footage. This can be done for green or blue as well.
In my example, I will only be making subtle adjustments on the red, green, and blue channels at the same time, so I will make sure I have the white circle selected.
Then, I will create 3 adjustment points on theCurves graph that will represent the shadows, mids, and highlights of the footage.
On the bottom point, click and pull it diagonally up/left. On the top point, click and drag it diagonally down/right. This will further increase the dynamic range of the footage between the brighter and darker areas.
13. If you're happy with the color correction you've done, you are now complete. As an additional step, under theColor Wheels & Match tab, there are 3 color wheels where you can continue to adjust the various tones in your footage to fine-tune the color you're going for.
In the example below, I have brought theMidtones color wheel slightly toward the purple/magenta side (opposite of green), which adds a slight magenta color tone to the overall footage.
That brings us to the end of this tutorial on the basics of color correction in Premiere Pro!
To recap, color correction is done to 'correct' the color and brightness of footage so that the result looks natural. And you will do so by changing the various settings such as Color Temperature, Saturation, Shadows, Highlights, Contrast, Whites, and Blacks. Now that your footage looks its best, you can add more finishing touches to your video project.
Want to see more from Will Bartlett? Look for more tutorials to come on the Storyblocks blog or subscribe to his YouTube Channel, Alli and Will .
- Tags:
- Adobe Premiere Pro,
- Video Tutorials,
Will Bartlett
Will is an Entrepreneur running several businesses including a Toronto based video production company and an online business that's trained 150,000+ students in a wide range of courses. He has 10+ years of cinematography and editing experience producing corporate, web and commercial videos. Second to that, Will has a YouTube channel with his wife and business partner Alli that's focused on filmmaking, traveling, and a behind the scenes of their lifestyles.
How To Increase Exposure In Premiere Pro
Source: https://blog.storyblocks.com/video-tutorials/basics-of-video-color-correction-in-premiere-pro/
Posted by: thomasprel1989.blogspot.com
0 Response to "How To Increase Exposure In Premiere Pro"
Post a Comment